Descripción

Servo de rotación continua Parallax

Es ideal para robótica y proyectos de movimiento básico

Está diseñado para rotación continua y se conecta fácilmente con cualquier microcontrolador.

Este es el servo del BASIC Stamp Boe-Bot, el Shield-Bot basado en Arduino y los robots cyber bot.

• Requisitos de energía: 4 a 6 VCC *, 15-200 mA
• Comunicación: modulación de ancho de pulso
• Material del engranaje: copolímero de acetal
• Dimensiones: 55,8 x 19 x 40,6 mm (2,2 x 0,8 x 1,6 pulg.)
• Par de torsión: 38 oz-in @ 6 V
  

Parallax Continuous Rotation Servo Overview:

The Parallax Continuous Rotation Servo is an ideal hobby servo for robotics and basic movement projects. It is designed for continuous rotation and to be easily interfaced with any Parallax microcontroller.

This is the servo on the BASIC Stamp Boe-Bot, Arduino-based Shield-Bot, SumoBot WX, and cyber:bot robot with micro:bit and is offered here as a replacement part. See our Tutorials site for use in our robotics kits.

Bidirectional continuous rotation

0 to 50 RPM, with linear response to PWM for easy ramping

Accepts four mounting screws

Easy to interface with any Parallax microcontroller, Arduino Uno, or other PWM-capable device

Weighs only 1.5 oz (42.5 g)

Note: Servo current draw can spike while under load. Be sure that your application’s power supply and voltage regulator is prepared to supply adequate current for all servos used. Do not try to power this servo directly from a BASIC Stamp module’s Vdd or Vin pins; do not connect the servo’s Vss line directly to the BASIC Stamp module’s Vss pin.

Parallax Continuous Rotation Servo Details:

Power requirements: 4 to 6 VDC* , 15 -200 mA

Communication: Pulse-width modulation

Gear material: Acetal copolymer

Spline: 3F 25-tooth

Dimensions: 2.2 x 0.8 x 1.6 in (55.8x 19 x 40.6 mm) excluding servo horn

Operating temp range: +14 to +122 °F (-10 to +50 °C)

Torque: 38 oz-in @ 6 V

NOTE: Specifications subject to change slightly without notice.